Silica gel filling and sealing machine

Silica gel filling and sealing machine

Silicone filling and sealing machine is a new product developed and produced by our factory according to the development needs of adhesive industry. It is specially designed for viscous adhesive manufacturers using metal tubes as packaging materials. This machine successfully solves the common problems of inaccurate measurement, tailing, wire drawing and so on caused by high viscosity, poor fluidity and micro leakage in the filling process. It is the choice of filling equipment for adhesive manufacturers.

Working process:

When in use, the machine shall be connected with the press. The viscous glue is pressed into the barrel of the filling machine through the press, the metal pipe is manually inserted into the fixed seat, and the pneumatic device is used to raise the container to the bottom close to the filling nozzle. During filling, the container drops synchronously to reduce the bubbles in the container to a low level. It is suitable for automatic filling and tail sealing of viscous colloid.

Structural features:

The unique filling nozzle structure does not drip. At the same time, it is equipped with an inert gas filling device, which not only solves the common problems such as trailing wire drawing in the filling process, but also makes the materials not solidify in the filling and storage process. It can ensure the quality of products. It has the advantages of simple operation, practicality and reliability.

All parts of the machine contacting materials are made of high-quality stainless steel.

Main technical parameters:

1. Power supply voltage: AC 220V 50Hz

2. Production capacity: 30 PCS / min

3. Filling volume: 10-150ml

4. Measurement accuracy < 2%

5. Applicable metal pipe diameter: Φ 10- Φ 40(mm)

6. Pneumatic pressure 4kg / cm ²

7. Overall dimension: 500 × five hundred × 1900(mm)

8. Air consumption: 0.1M ³/ min

9. Overall weight: 300kg